The Crossbow™ is a self-tacking jib system designed for high-performance dinghies, skiffs, and catamarans under six meters (20 feet). The system features a curved track that hinges to align both car and track with the sheet loads for less friction,...
Battcar switch systems cut sail stack height in half by automatically splitting cars onto two tracks. Switch system track is machined or extruded from 6061-T6 aluminum and hardcoat-anodized for a long-lasting surface.
High-performance end controls allow the installation of 2:1 to 4:1 purchases.Includes 5/16" RH fasteners.
Sheave Ø (mm)51 mm
Sheave Ø (in)2 in
Length (mm)106 mm
Length (in)4 3/16 in
Harken anodized aluminum T-Track features rounded top edges for protection and impact resistance. Drilled and tapped holes at ends make endstop and B1877 end control installation easy. Track comes in clear or black-anodized finishes.Part Number: 3086.2...
Anodized aluminum T-Track features rounded top edges for protection and impact resistance. Track comes in clear or black-anodized finishes.
Length (m)3 m
Length (ft in)9' 10 1/8" ft in
Weight (oz)95.22 oz
High-performance end controls allow the installation of 2:1 to 5:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Delrin® is a...
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Whether racing or cruising, these smooth- rolling systems pay huge dividends in sail control and are safer and faster than playing the...
High-performance end controls allow the installation of 1:1 to 6:1 purchases.Includes 3/8" RH fasteners.
Sheave Ø (mm)52 mm
Sheave Ø (in)2 1/4 in
Length (mm)110 mm
Length (in)4 5/16 in
Sheave carriers feature ESP sleeve bearing sheaves. Use pinstop cars in applications where lead positions change infrequently.
Sheave Ø (mm)76 mm
Sheave Ø (in)3 in
Stand-up toggles hold blocks upright on travelers. Stand-up toggles with control tangs allow attachment of control blocks.
Mainsheet block pin Ø (mm)8 mm
Mainsheet block pin Ø (in)5/16 in
Control block pin...